The 2024 Mobile B-46 on Ford F600 is a truck-mounted hydraulic drill rig designed for geotechnical, environmental, sampling, and coring applications. Mounted on a Ford F600 4×4 diesel chassis, this unit combines the mobility of an under-CDL truck platform with the drilling versatility of the Mobile B-46. With a 4-speed rotary head, hydraulic feed system, SPT hammer, water pump, and multiple hoist options, this rig is well-suited for contractors who need a compact, road-ready drilling solution for a wide range of field applications.
Key Features
• Truck-mounted hydraulic drill rig designed for field mobility and jobsite access
• Under-CDL platform supports practical transport and setup
• Configured for geotechnical, environmental, sampling, and coring applications
• Hydraulic top head design supports rotary, auger, and coring work
• Compact truck-mounted layout supports urban, commercial, and limited-access jobsites
• Equipped for SPT sampling, wireline work, hollow-stem auger, and rotary drilling applications
• Built for contractors needing flexibility across a wide range of drilling conditions
Unit Specifications
• Year: 2024
• Drill Type: Hydraulic truck-mounted drill rig
• Deck Engine: John Deere 4045TF290 Tier 4 diesel engine
• Drill Engine Power: 74 hp
• Drill Engine Torque: 195 lb-ft
• Drill Engine Displacement: 4.5 L
• Starting Circuit: 12V
• PTO: Transmission transfer case
• Hydraulic System: Heavy-duty tandem vane pump
• Hydraulic Oil Tank: 38-gallon capacity
• Hydraulic Filtration: 10-micron replaceable return filter
• Carrier Mounting: Ford F600 4×4 diesel truck
• Truck Transmission: Automatic
• Truck Trim: XL trim package
• Rig Color: Mobile Speedway Blue
• Recommended Minimum GVWR: 20,000 lbs
• Basic PTO Unit Weight with Full Fluids: 4,800 lbs
Hydraulic Feed System
• Pulldown Force: 14,600 lbs
• Retract Force: 19,400 lbs
• Feed Stroke: 6.5 ft
• Feed Down Speed: 0–148 ft/min
• Feed Retract Speed: 0–111 ft/min
• Feed System: Double-acting hydraulic cylinder attached directly to the rotary drive system
• Feed Frame: Folds 90° in transport position
• Feed Controls: Operator console controls for feed pressure and speed
Drill Head Rotary
• Rotary Head: 4-speed hydraulic rotary head
• Rotary Drive: 2-speed hydraulic motor with 2-speed planetary gearbox
• Maximum Rotary Speed: 721 rpm
• Maximum Torque: 5,417 ft-lb
• Spindle: 2 in open spindle
• Spindle Connection: Multi-bolt flange
• Quick-Change Adapter: For transition between auger drilling and rotary/core drilling
• Quill Rod Bottom Thread Options: NWJ, NQ, or AWJ pin or box down
• Auger Connection: 1-5/8 in hex
Drill Mast & Positioning
• Mast: Electric-welded steel tube mast with rigid cross bracing
• Mast Operation: Raised and lowered with double-acting hydraulic cylinder
• Mast Feature: Quick disconnect for low overhead clearance operations
• Slide Base: In-out and sideways slide base
• Front Leveling Jack: 24 in stroke, front mounted
• Rear Leveling Jacks: Two 36 in stroke, rear mounted
• Driller/Helper Platform
• Fold-Down Work Table
Winch Package
• Main Hoist: 4,500 lb capacity with brake
• Auxiliary Hoist: 3,000 lb capacity with fail-safe hydraulic brake
• Auxiliary Hoist Line Speed: 126 ft/min
• Wireline Hoist: 900 lb capacity with brake
Water System
• Water Pump: Moyno 3L6 progressive cavity water pump
• Flow Rate: 44 gpm
• Pressure: 225 psi
• Suction Port: 2 in
• Discharge Port: 1.25 in
• Suction Hose: 20 ft with foot valve strainer
• Water Piping: For side-port water swivels
Rod Clamp & Breakout Wrench
• Rod Clamp / Breakout Wrench: Rear jack-mounted hydraulic system
• Breakout Wrench: Hydraulic cylinder-actuated 36 in pipe wrench
• Rod Clamp Range: 1-5/8 in to 5-3/4 in OD drill pipe
• Positioning: Manually pivots from on-hole to off-hole
• Alignment: Hydraulically moves in and out for over-hole alignment
Standard Features
• Operator console with stationary control layout
• Mobile LIFELINE emergency shutdown system with manual reset
• Mast raise/lower safety alarm
• Lockable battery box
• Cold weather starting package
• All engine gauges in rig control panel
• Hydraulic oil cooling and filtration system
• Standard duty automatic SPT hammer, 140 lb slug
• AWJ hammer rod pin
• 1-5/8 in hex safety drive coupling
• Steel body fabrication for drill
• Behind-cab expanded metal bulkhead with integrated headache rack
• Spare tire mount
• 10 ft rod rack
• Combination 5 ft auger mounted on drill deck
• Two 6.7 ft³ aluminum double-unit toolboxes
• Front frame extension
• Night lights
• Auxiliary circuit with quick disconnects
• Cable holders
Specifications are provided for general reference and may vary by unit configuration.
Interested in this Mobile B-46 on Ford F600? Contact Rig Source at (630) 365-1649 to confirm current availability, pricing, configuration details, and transport requirements.
